Search filter
Search filter
Products ()
Merchants ()
Manufacturers ()


Request about this Machine
Asking price

  • Reference number Reference number 1049-385316
    Manufacture Year Manufacture Year 1975
    Operation Hours Operation Hours not applicable
  • Vendor

    Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
    James-Watt-Straße 12
    72555 Metzingen
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Gear Cutting Machines
  • Type of Machine

  • Sort of Machine

    Bevel Gear Testers
  • Manufacturer

  • Technical data

    max. wheel diameter
    400 mm
    gear width
    0 mm
    pinion diameter - max.
    254 mm
    axial cross angle
    90 °
    total power requirement
    15 kW
    weight of the machine ca.
    dimensions of the machine ca.
  • Description

    G L E A S O N (USA)
    Hypoid Spiral Bevel Gear Running Testing Machine
    Model 513 TESTER, Year 1975, Serial No. 721607

    This machine is very suitable for precision production testing of spiral and
    hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and
    the pinion spindle is horizontal.
    The pinion cone distance can be adjusted while the machine is working in
    order to find the optimal mounting position whereby the gear is "loaded"
    with a preset torque.
    The axial pinion position can be adjusted until the quietest meshing position
    of the traction flank is found. Likewise, the thrust flank can be tested
    during the return run.
    Marking compound is sprayed on both sides of the teeth so the flank contact
    pattern can be seen. Working cycles, as well as the positioning in the
    tooth gap, are automatic. The gear quality can be assessed by recording the
    harmonic frequencies, which are displayed on a separate monitor and which
    can be analyzed with a RHF Control. Machine can be used for soft testing of
    production parts, as well as for mating sets of hardened gears and pinions
    prior to lapping, and for final testing after lapping to select the optimum
    pinion mounting distance. Also ideal for lab work, processing, and quality

    Max. gear outside diameter, approx. 508 mm
    Max. pinion outside diameter, approx. 254 mm
    Axial cross angle 90 °
    Offset of pinion spindle above/below gear spindle, max. 102 mm
    Diameter of taper hole, pinion spindle 99/95 mm
    Diameter of taper hole, gear spindle 56/55 mm
    Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm
    Speeds of gear spindle, infinitely variable 0 - 1,250 rpm

    Spindle drive, approx. 5 / 7.5 kW
    Total electrical load, approx. 15 kW - 380 V - 50 Hz

    Accessories / Special Features
    * Large display for 1 / 2 / 3 harmonies, display for pinion distance,
    pinion speed, as well of gear torque in kg/torque, etc.
    * Hydraulic workpiece clamping. * Hydraulic slide clamping.
    * Tank for marking compound with mixer and pump, separate.
    * Separate switch cabinet. * Separate hydraulic unit.
    * Lots of spare parts, spare motors, etc.

    Condition : Good. Machine can soon be inspected under power.
    Delivery : Ex stock, as inspected.
    Payment : Net, after conclusion of contract.

    This ad was created with MODUL MWS - the software solution of LogoTech.
  • State


Send request

More products from Hans-Jürgen Geiger Maschinen-Vertrieb GmbH