Search filter
Search filter
Products ()
Merchants ()
Manufacturers ()


Request about this Machine
Asking price

  • Reference number Reference number 1049-448351
    Manufacture Year Manufacture Year 1985
    Operation Hours Operation Hours not applicable
  • Vendor

    Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
    James-Watt-Straße 12
    72555 Metzingen
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Gear Cutting Machines
  • Type of Machine

    Gear milling machines
  • Sort of Machine

    Horizontal gear hobbing machines
  • Manufacturer

  • Technical data

    max. wheel diameter
    80 mm
    gear width
    150 mm
    max. module
    min. module
    total power requirement
    10 kW
    weight of the machine ca.
    2400 kg
  • Description

    M I K R O N (Switzerland)
    Fully Automatic Gear Hobber for Worm Gears
    Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15

    max. gear- without feed magazine approx. 80 mm
    max. gear- with feed magazine approx. 50 mm
    Module max. 2, / 2,5

    Axial milling length approx. 150 mm
    max. workpiece-mounting length approx. 200 mm

    Milling slide can be swivelled up to 90 degrees
    Milling cutter - 24 - 50/63 mm
    Max. radial distance of milling slide 0-14/18 mm
    Milling cutter adjustment max. 25 mm
    Milling cutter speed 212 - 2.000 rpm

    Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation
    radial infinitely adjustable 0,2 - 200 mm/min.

    Milling spindle drive 3 kW
    Total electrical load approx. 10 kW - 50 Hz - 380 Volt
    Weight approx. 2.400 kg

    Accessories/Special Features:
    " Fully automatic operation cycle and minimum idle times due to programmable
    SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off
    for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering
    including 30 different numeric error displays
    Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for
    loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock,
    the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously.
    The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper.
    The whole process is electrically monitored and checked.
    The complete loading facility is encased by plexiglass.
    " Hydraulic work piece clamping device including collets and hydraulic ejector
    " separate cooling system with magnetic separator * separate hydraulic system * various change gears

    This machine is set up for worm gears/armature shafts that can be used for adjustable
    car seats, window lifters, etc.

    This ad was created with MODUL MWS - the software solution of LogoTech.
  • State


Send request

More products from Hans-Jürgen Geiger Maschinen-Vertrieb GmbH