DMX 80 U (Reference-Nr. 051394)

•  
  Reference number 051394

  Manufacture Year 2024

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Vertical Machining Centre - Direct Measuring System X, Y, Z - Coolant air-blast changeover external switchable via M-Function; - Thermal compensation - DMG MORI NETservice; Control: DMG MORI ERGOline X Multi-Touch control Siemens
  Characteristics
  Movement B-Axis	(-15/+110) degree
  Type of magazine	Chain
  Tool Magazine with	30 Positions
  Clamping System	DIN 69872
  Spindle taper	SK 40 DIN 69871
  Drive power (40% DC)	20 kW
  Drive power (100% DC)	14,5 kW
  Speed max.	15000 rpm
  Rapid feed X / Y / Z	42/42/42 m/min
  Table surface	Ø 800 x 620 mm
  Movement C-Axis	360 degree
  Movement X / Y / Z	800/600/510 mm
  Type of gripper	Double gripper

• Specification

  
  

  Production Package 20 bar with chip conveyor	Production Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar; - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handw
  Tropical Package for InlineMASTER® spindle	Tropical Package for machine with InlineMASTER® spindle Option includes: - Active cooling unit for electrical cabinet - Cooling unit for spindle Recommended from 35°C to max. 45°C environmental temperature.
  inlineMASTER® spindle 15.000 rpm	inlineMASTER® spindle 15.000 rpm Spindle speed range 20 to 15.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 20kW (40% DC) / 14,5kW (100% DC) Torque: 121 Nm (40% DC) / 84 Nm (100% DC) bearings oil-air l
  Tool (Un-) loading	Tool (Un-) Loading through Magazine Door during AUTO Mode Option includes: - Tool magazine door - Automatic magazine shutter (instead of brushes) - Buttons for magazine rotation
  Renishaw Touch Probe-Kit	Renishaw Touch Probe-Kit Option includes: - PP40 touch probe with optical signal transmission; - TS27R probe for tool measurement; - measuring cycles with tool breakage monitoring - Calibration tool; - Calibration ring; - Case for equipment
  3D quickSET for DMX U	3D quickSET for DMX U Tool Kit for control and compensation of the cinematic accuracy of 5-Axis machine configurations, inclusive preparation
  Special equipment	Oil and Emulsion Mist Separator type A1100 with dirtiness indicator.

• State

  Used