Facing and Centering Machine SEMA END 70-1-2-S-100-NC-A

•  
  Reference number 1113-235071

  Manufacture Year 2008

  Operation Hours not applicable

• Vendor

  HD Werkzeugmaschinenhandel GmbH
  Robert-Bosch-Straáe 1
  35460 Staufenberg

  Germany

  

• Main Category

  Metal working machines

• Category

  Various

• Type of Machine

  Other

• Manufacturer

  SEMA

• Description

  max. workpiece diameter:29 mm
  min. workpiece diameter:26 mm
  workpiece length:66 mm
  
  the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm
  Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm
  Total length will probably be almost 400 mm possible with a few conversions.
  Also dependent on tool lengths, machining lengths on the component, etc.
  
  Workpiece: Piston pin
  Drawing number: WHT 000 718, WHT 000 718 A
  Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65
  Length: 66 or 65 mm
  Material: 17Cr3
  Quantity: xxx parts / year
  Cycle time: 5 sec.
  However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing the clamping prisms. The parts that were typically produced on this machine left the system via a chute onto a conveyor belt. If longer parts were to be manufactured, this would need to be examined in detail.
  
  
  Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.
  Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.
  Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.
  Copyright © 2005-2025, Josef Weber. All rights reserved.
  

• State

  Used